Stone Care & Restoration by Fox Marble

Oxy-Klenza™ is a is a powerful oxygen-based, chlorine free cleaner for inside/outside, and residential / commercial applications. It is a multi-purpose cleaner that breaks down organic stains and soiling. Oxy-Klenza™ is ideal for cleaning patios, kitchens, bathrooms, decks, floors, building facades, walls, cladding, public spaces, swimming pool surrounds, garages, driveways, eating and entertaining areas. Typical application: Oxy-Klenza™ is a powerful alkaline cleaner (typically pH 9-11) for tough dried-in stains and soiling, including grease, mold, algae and leaf marks. It is safe for use on natural stone, tile, masonry, concrete, grout, vinyl and unfinished wood. Benefits: Oxy-Klenza™ is a powder concentrate that goes further and is safer to transport / store. It also disinfects and breaks down odors. Oxy-Klenza™ is biodegradable – decomposes into oxygen, water and natural salts. Application rate: Typical usage rate of 2/3 of a standard cup Oxy-Klenza™ per 100 sq.ft. (10 sq.m.), depending on surface conditions. How to use: Method One: TEST PRODUCT ON A SMALL AREA BEFORE FULL APPLICATION. If satisfied with test results; for heavy cleaning prepare product by stirring 2/3 of a standard cup of Oxy-Klenza™ into a plastic bucket filled with 2 ½ Gallons (10 litres) of clean warm water until it dissolves. For light cleaning prepare product by stirring 1/3 of a standard cup of Oxy-Klenza™ into a plastic bucket filled with 2 ½ Gallons (10 litres) of clean warm water until it dissolves Apply solution generously with a mop or plastic watering can and leave for 5 to 15 minutes. Do not allow solution to dry on surface (large areas can be cleaned in sections). Use a mop or sponge to clean the surface. Heavily soiled areas should be gently scrubbed with a soft brush. Typical usage rate of 2/3 standard cup Oxy-Klenza™ per 200 sq.ft. (20 sq.m.), depending on surface conditions. Repeat application if required. Rinse surface thoroughly with clean water. Method Two: TEST PRODUCT ON A SMALL AREA BEFORE FULL APPLICATION. If satisfied with test results prepare surface for full application by sweeping or vacuuming all loose dust and dirt from the surface. Thoroughly wet the surface with water. Large areas should be cleaned in sections. Lightly sprinkle Oxy-Klenza™ onto the wet surface and leave for 5 to 15 minutes. Do not allow solution to dry on surface. Use a mop or sponge to clean the surface. Heavily soiled areas should be gently scrubbed with a soft brush. Excess powder will dissolve by scrubbing. Typical usage rate of one cup Oxy-Klenza™ per 100 sq.ft. (10 sq.m.), depending on surface conditions. Repeat application if required. Rinse surface thoroughly with clean water. Oxy-Klenza™ qualifies for LEED 2009 IEQ Credit 3.3: Green Cleaning - Purchase of Substainable Cleaning Products and Materials 1 Point. Pack size: 2.2 lb (1 kg)